Knitting pattern for a men's chain mail sweater. Men's sweater - gladiator. Knitting pattern with braids
Men's sweater"Gladiator" Model Olesya Danilyuk Size 48-50 The model is made with knitting needles. You will need: 550 g of Cascade yarn (40% merino wool, 60% acrylic, 125 m x 100 g, steel color); knitting needles No. 6.5; needle for knitwear. The basis for calculating knitting is a product pattern (see Figure 7) and a sample, patterned"lattice". Pattern "lattice" Type on the knitting needles the number of loops a multiple of 3 and knit the 1st row: purl loops. 2nd row: 2 front, * yarn over, 3 front, then put the 3rd loop on the previous two *, 1 front. 3rd row: purl. 4th row: 1 person., * 3 facial, then put the 3rd loop on the previous two, yarn over *, 2 persons. Repeat the pattern from the 1st to the 4th rows. Pattern "embossed braid" 1st row: purl sts, middle 5 sts close in the usual way (photo 1); 2nd row: facial sts, over the 5th closed dial 10 sts in the usual way (photo 2); 3rd row: facial sts, 4th row: purl; 5th row: purl sts, middle 10 sts close in the usual way; 6th row: facial sts, over the 10th closed dial 10 sts in the usual way; 7th row: facial sts, 8th row: purl sts, close the middle 10 sts in the usual way (photo 3). Knit, repeating the 5th-8th rows. The description is given at the density of knitting the main pattern with knitting needles No. 6.5: 11.5 p. x 20r. \u003d 10 x 10 cm. In order to knit a product of the desired size and shape, you need to focus on your knitting density and individual pattern. Description of knitting for a men's sweater Cast on 62 sts for the back and knit first 3 cm with an elastic band 2 x 1, then with a lattice pattern. At a height of 40 cm from the bottom edge, make reductions for armholes. To do this, close on each side first 3, then 1 time for 2, and 1 time for the 1st loop in each 2nd row (50 p.). Continue straight, at a height of 18 cm from the armholes, begin to form the bevel of the shoulder (closing 2 times 5 sts and 1 time 6 sts in each 2nd row), and then, after 2 rows, the neck, closing first the middle 12 p., then on each side 1 time for 2 p. and 1 time for the 1st p. in each 2nd row. Before knit similarly, but with a deeper neckline. Why, at a height of 16 cm from the beginning of the armhole, begin to form the neck: first close the middle 6 sts, then on each side 1 time sweat 3 sts, 1 time 2 sts and 1 time 1st st in each 2- m row. Next, knit the sleeves. Cast on 29 sts on the needles and work first 6 cm with a 2 x 1 elastic band, continue with the lattice pattern. For side bevels, increase 1 st from each edge in the 16th and 28th rows. After 32 rows from the elastic, go to the strip pattern, alternating 2 rows of purl and 2 rows facial surface. Make the next increase in the 4th strip of the pattern, then in the 8th and in the 16th. After the 4th strip, start knitting the “embossed braid” pattern. At a height of 52 cm from the bottom edge, make reductions for armholes. To do this, close on each side first 3, then 1 time for 2, and 1 time for the 1st loop in each 2nd row, then 1 time for the 1st st in the 4th row. Then 2 times 2 p., And 1 time 3 p. In each 2nd row. On the remaining 16 loops, knit a shoulder strap with a length equal to the length of the shoulder bevel, distributing the pattern as follows: 3 purl sts, then 10 sts of embossed braid, 3 purl. In the last row of the lattice for a relief braid, dial not 10, but 5 loops, knit a row of facial ones, close the loops. Next, from the horizontal stripes of the lattice (photo 4), “braid” the braid, do this by analogy with raising the lowered loop along the front side of the canvas. Twist the 1st strip, making a loop out of it and pull the next strip through it (photo 5), then, similarly, all the rest (photo 6). Fasten the last loop with stitches using a needle. In the same way, sew up the hole that formed at the beginning of the "embossed braid". Connect the parts at the side and shoulder seams. Make the neck like this: lay a chain stitch along the contour of the neck, pick up loops from the upper pigtail, knit 2 rows of purl, 2 rows of facial, 2 rows of purl, close the loops.
What could be more romantic for a woman in a cold season than the image of a man in a warm knitted sweater near? Probably only the fact that this sweater is knitted for him with his own hands. Such a wonderful gift as a knitted sweater will warm and give a feeling of comfort even to the most brutal young man, you just need to choose a model of the future sweater based on the preferences and tastes of a man to definitely get to the point!
To begin with, it is worth considering several options for knitting men's sweaters. There are a lot of models, as well as ways of knitting sweaters, pullovers, jumpers. Here you need to know what exactly a man will like: braids, arana, relief patterns, funny drawings with deer or minimalism and rigor in every line of a knitted item.
We will study in more detail several possible options for knitting sweaters to make it easier to choose the most suitable one. Beginning needlewomen will also be able to surprise loved ones with their skills, you just need to follow the diagrams and descriptions exactly.
Men's knitting sweater - diagrams with descriptions
If a needlewoman has only recently begun to master the art of knitting, but really wants to please a loved one with a pleasant and beautiful thing made by herself, this is no reason to take on small “projects”, like knitting hats, scarves or vests. Knitting a sweater is quite within the power of beginners, it is only important to choose a simple model for a start and carefully follow the instructions. Consider several options for knitting sweaters with knitting needles, which are suitable for both beginners and experienced knitters.
The simplest model for beginner needlewomen
Popular articles:
To begin with, let's try to knit a men's sweater with knitting needles with a wide elastic band. We will get a casual option for everyday activities.
Sweater sizes:
48/50 (52/54) 56/58
For work you will need:
- Yarn (100% sheep wool sectional dyeing; 100 m/50 g) 650 (700) 750 g;
- Spokes No. 5;
- Circular knitting needles No. 5, 50 cm long.
The main pattern is knitted:
Alternately - 4 facial, 2 purl.
Knitting density:
16 p. x 22 p. = 10 x 10 cm.
Progress:
Back
Cast on 90 (96) 102 loops on the needles and knit as follows: hem, 1 purl, 14 (15) 16 x 6 sts each with the main pattern, 1 purl, hem.
After 45 (46) 47 cm = 98 (100) 102 p. from the initial row close on both sides for armholes 2 (3) 4 p., then in each 2nd p. 1 x 2 p. and 3 (4) 6 x 1 p. = 76 (80) 84 p.
At the height of the armhole 21 (22) 23 cm = 46 (48) 50 p. close for the shoulder bevel in every 2nd p. 2 x 6 (7) 8 p.
Simultaneously with the first decrease for the shoulder bevel, cast off the middle 32 sts for the neck, then knit both sides separately.
On the inner edge for further rounding, close in every 2nd p. 3 x 1 p., then close the remaining 7 p.
Before
Cast on 90 (96) 102 loops on the needles and knit as follows: hem, 1 purl, 14 (15) 16 x 6 sts each with the main pattern, 1 purl, hem. Then knit like a back, but with a deeper neck.
To do this, at an armhole height of 17 cm = 38 p. close the middle 26 p., then knit both sides separately.
On the inner edge for rounding, close in every 2nd p. 6 x 1 p.
Shoulder bevel start to perform at the same height as on the back.
Finish the other side in a mirror image.
Sleeves
Cast on 42 (48) 54 loops on the needles for each sleeve and knit as follows: hem, 2 purl, 6 (7) 8 x 6 sts each with the main pattern, 2 purl, hem.
For bevels, add on both sides in every 6th p. 5 x 1 p., in each 8th p. 5 x 1 p. = 62 (68) 74 p. Include increases on both sides in the pattern.
Through 47 (48) 49 cm = 104 (106) 108 p. from the initial row close the sleeves on both sides 2 (3) 4 p., then in each 2nd p. 1 x 2 p., 4 x 1 p., 1 (2) 3 x 2 p., 2 x 3 p. and 2 x 4 p.
Cast off remaining 14 sts on next row.
Assembly
Moisten details, stretch acc. the dimensions indicated in the pattern, chop on the pattern and leave to dry completely.
Run shoulder seams.
On circular needles dial along the edge of the neckline 74 (80) 86 p. and knit with the main pattern 20 (21) 22 cm = 44 (46) 48 p., close the loops freely.
Run the side seams and seams of the sleeves, sew in the sleeves.
Beautiful model with a pattern for men
Subject knitted clothes often associated with northern culture, since many knitting methods came from countries with a predominantly cold climate. Knitted needles embossed patterns, motifs, arans and braids have always been incredibly popular not only in the creation of women's clothing, they are often chosen when knitting things for men and children. Therefore, you definitely need to learn how to knit a men's sweater with a pattern and try to create it yourself. Consider the pattern and description of knitting a rustic sweater model with embossed large patterns and a high collar.
Sweater sizes:
For work you will need:
- Yarn (85% wool, 15% mohair; 50 g / 60 m) - 27 (28) 30 (31) skeins of white undyed;
- Spokes No. 4.5 and 5;
Product width and length:
- According to the circumference of the chest - 108 (116) 124 (132) cm;
- 69 (70) 71 (72) cm.
Knitting density:
Approximately 20 p. x 27 p. \u003d 10 x 10 cm, knitted with a relief pattern with knitting needles No. 4.5 and 5. In order for the knitting density to correspond to the specified one, fragments of the structural pattern should be performed according to the scheme on knitting needles of different thickness - No. 4.5 and 5.
If only one number is indicated in the instructions, then it applies to all sizes.
Knitting pattern:
Progress:
Back
On knitting needles No. 4.5, dial 108 (116) 124 (132) p. And knit with a relief pattern according to the scheme (1st row = out row).
When the length of the part is 44 cm, start forming the armholes. To do this, fix the mark in the middle of the back and on both sides (at the beginning of each row) close 3, 2, 1, 1, 1 p. = 92 (100) 108 (116) p.
When the height of the armhole from the mark is 23 (24) 25 (26) cm, start forming the neck: close the middle 18 (18) 22 (22) p. and finish both sides separately.
Then at the beginning of the next 2 p. close from the inner edge to round the neck 3, 2 p.
At the same time, from the outer edge, bind off for the shoulder bevel at the beginning of each row for 10, 11, 11 (12, 12, 12) 12, 13, 13 (14, 14, 14) loops.
Before
Knit like a back, but only with a deeper neck.
When the last 11 cm is left to the end of the part (check on the back - to the last closed loops of the shoulder bevel), close the middle 8 (8) 10 (10) p. And finish both sides separately.
From the inner edge close to round the neck at the beginning of each row 3, 2, 2, 1, 1, 1 (3, 2, 2, 1, 1, 1) 3, 2, 2, 1, 1, 1, 1 ( 3, 2, 2, 1, 1, 1, 1) p.
Having knitted to the first closed loops of the shoulder bevel (check on the back), close the loops in the same way.
Sleeves
On knitting needles No. 4.5, dial 52 (56) 60 (64) p. And knit with a relief pattern according to the scheme (1st row = out.
row).
Important: distribute the pattern in both directions from the middle, indicated by an arrow in the diagram.
When the length of the part is 10 cm, add 1 st on both sides (after / before the edge loop). Repeat these increases in every 6th p., including the added loops in the pattern, = on the needles 84 (88) 92 (96) p.
When the length of the sleeve is approximately 48 (49) 50 (51) cm, close for an okat on both sides (at the beginning of each row): 2 times 2 p., 2 times 3 p., 2 times 4 p. And 2 times 5 p. Then close the remaining loops.
Assembly
Sew the details on the front side with mattress and knitted seams = mattress - longitudinal edges of the parts (= 1 p. x 1 p.), Knitted seam - edges with closed loops.
Sew side seams and sleeve seams. Sew in the sleeves, starting from the shoulder seam and the middle of the sleeve, sew in both directions down, then sew the sleeve into the armhole in the lower section.
Stand collar
On circular knitting needles No. 4.5, dial from the front side of the loop, starting from the right shoulder seam: 1 st from each closed loop along the edge of the neck of the back + 5 sts additionally at the beginning and end (distribute the loops evenly); 1 st from each row down to the last 2 closed loops on the left side of the front; 1 st from each closed loop; On the right side of the front, cast on the loops as on the left (the total number of loops must be a multiple of 4).
Knit in a circle: 1 p. purl, 1 p. facial, 1 p. purl and 1 p. facial.
Then continue to knit in a circle with an elastic band (= alternately 2 persons. and 2 out.) until the collar measures 16 cm, and the loops are cast off.
Knitting pattern with braids
Knitting a men's sweater with knitting needles is a special pleasure, because this thing will give warmth to an important person for you. Moreover, this thing can also become a real decoration for a man. For this, more complex embossed patterns in the form of braids, weaves and cones are just right. Let's consider in detail how to knit a men's sweater with braids - a fashionable classic for all time.
Sweater sizes:
48/50 (52/54) 56/58
For work you will need:
- Yarn (100% sheep wool; approx. 170 m/100 g) approx. 800 (800) 900 g of sulfur;
- Spokes No. 4.5 and 5;
- Circular knitting needles No. 4.5, 40 cm long.
Patterns and schemes
Rubber: alternately 3 facial, 2 purl.
cross elastic band: alternately 2 facial, 2 purl.
Facial surface: front lines - facial loops, purl rows - purl loops.
Patent pattern (A)
Knit on 7 loops according to the scheme (= segment A).
1–4th p. repeat 1 time, then the 3rd and 4th p. keep repeating.
Pattern "Cones" (B)
Knit on 11 loops according to the scheme (= segment B). IN
1–6th p. keep repeating.
Pattern "Scythe" (C)
Knit on 24 loops according to the scheme (= segment C).
1–26th p. tie 1 time, then 3-26th p. keep repeating.
Pattern alternation
Knit and distribute loops according to the instructions.
Knitting pattern and description
Knitting density:
18 p. x 28 p. = ok. 10 x 10 cm, knitted with front stitch;
25 p. x 28 p. = ok. 10 x 10 cm, knitted with an alternating pattern (average density).
Progress:
Back
On knitting needles No. 4.5, dial 115 (125) 135 loops. For a belt, knit with an elastic band 17 p. (= 6 cm), while the 1st p. - purl, start with 3 facial. In the last r. add, evenly distributing, 13 p. = 128 (138) 148 p.
Then switch to knitting needles No. 5, distribute the loops as follows: hem, 0 (3) 6 sts with front stitch, 7 sts with patent pattern A, 3 (5) 7 sts with front satin stitch, 7 sts with patent pattern A, 9 sts cross elastic, 74 p. alternating patterns between arrows a and b, 9 p. cross elastic, 7 p. patent pattern A, 3 (5) 7 p. facial stitch, 7 p. patent pattern A, 0 (3) 6 n. front stitch, hem.
After 33.5 (32) 30.5 cm = 94 (90) 86 p. from the elastic close on both sides for armholes 3 (4) 4 p., then in each 2nd p. close 1 x 2 (3) 3 p., 3 (4) 5 x 2 p. and 2 (3) 4 x 1 p. = 102 (102) 106 p.
After 20 (21.5) 23 cm = 56 (60) 64 p. close from the armhole on each side for the bevel of the shoulder 8 (8) 9 p., then in each 2nd p. Cast off another 3 x 8 sts.
Simultaneously with the 1st decrease for the shoulder bevel, close the middle 18 (18) 20 points for the neck and finish the left side first.
On the inner edge for further rounding, close in every 2nd p. another 2 x 5 p.
Finish the other side in a mirror image.
Before
Knit like a back, but for a deeper neck already after 15.5 (17) 18.5 cm = 44 (48) 52 p. armhole height close the middle 16 (16) 18 p. and first finish the left side.
On the inner edge for further rounding, close in every 2nd p. 2 x 3 more p., 1 x 2 p. and 3 x 1 p.
Shoulder bevels to perform, as on the back.
Finish the other side in a mirror image.
Sleeves
On knitting needles No. 4.5, dial 60 loops for each sleeve.
For the cuff, knit with an elastic band 17 p. (= 6 cm), while the 1st p. - purl, start with 3 facial. In the last r. add, evenly distributing, 8 p. \u003d 68 p.
Go to needles number 5. Distribute the loops as follows: edge, 5 sts with patent pattern A from the arrow c, 9 sts with transverse elastic, 7 sts with patent pattern A, 24 sts with “Scythe” pattern C, 7 sts with patent pattern A, 9 sts with transverse rubber band, 5 p. patent pattern A to arrow d, edge.
For bevels after 3.5 cm = 10 p. from the cuff, add 1 p. on both sides, then in each 10th p. add 2 x 1 p. and in each 10 (8) 6th p. 7 (9) 11 x 1 p. = 88 (92) 96 p. The added loops after reaching the full patent pattern A (= 7 p.) Knit with front stitch.
After 45 (43.5) 42 cm = 126 (122) 118 p. from the cuff close the sleeves on both sides 3 (4) 4 p., then in each 2nd p. close 1 x 3 p., 4 (3) 3 x 2 p., 10 (12) 14 x 1 p., 2 x 2 p. and 2 x 3 p.
After 13.5 (15) 16.5 cm = 38 (42) 46 p. sleeve height close the remaining 20 (22) 26 p.
Assembly
Sew shoulder and side seams.
For the collar, cast on circular needles No. 4.5 loops along the edge of the neck of the back 38 (38) 40 p. And along the edge of the neck of the front 42 (42) 45 p. = 80 (80) 85 p. Knit alternately 2 facial, 3 purl. After 23 cm = 62 p. close the loops according to the drawing. Turn the collar to the front.
Run the seams of the sleeves, sew the sleeves.
Model Olesya Danilyuk
Size 48-50
The model is made with knitting needles.
You will need:
- 550 g of Cascade yarn (40% merino wool, 60% acrylic, 125 m x 100 g, steel color);
- knitting needles No. 6.5;
- needle for knitwear.
The basis for calculating knitting is a product pattern (see Figure 7) and a sample connected with a “lattice” pattern.
Lattice pattern
Type on the knitting needles a number of loops multiple of 3 and knit the 1st row: purl loops.
2nd row: 2 front, * yarn over, 3 front, then put the 3rd loop on the previous two *, 1 front.
3rd row: purl.
4th row: 1 person., * 3 facial, then put the 3rd loop on the previous two, yarn over *, 2 persons.
Repeat the pattern from the 1st to the 4th rows.
1st row: purl sts, close the middle 5 sts in the usual way (photo 1);
2nd row: facial sts, over the 5th closed dial 10 sts in the usual way (photo 2);
3rd row: front p.,
4th row: purl;
5th row: purl sts, middle 10 sts close in the usual way;
6th row: facial sts, over the 10th closed dial 10 sts in the usual way;
7th row: front p.,
8th row: purl sts, close the middle 10 sts in the usual way (photo 3).
Knit, repeating the 5th-8th rows.
The description is given at the density of knitting the main pattern with knitting needles No. 6.5: 11.5 p. x 20r. \u003d 10 x 10 cm. In order to knit a product of the desired size and shape, you need to focus on your knitting density and individual pattern.
Description of knitting men's sweater
Dial 62 stitches for the back and knit first 3 cm with an elastic band 2 x 1, then with a lattice pattern. At a height of 40 cm from the bottom edge, make reductions for armholes. To do this, close on each side first 3, then 1 time for 2, and 1 time for the 1st loop in each 2nd row (50 p.). Continue straight, at a height of 18 cm from the armholes, begin to form the bevel of the shoulder (closing 2 times 5 sts and 1 time 6 sts in each 2nd row), and then, after 2 rows, the neck, closing first the middle 12 p., then on each side 1 time for 2 p. and 1 time for the 1st p. in each 2nd row.
Before knit similarly, but with a deeper neckline. Why, at a height of 16 cm from the beginning of the armhole, begin to form the neck: first close the middle 6 sts, then on each side 1 time sweat 3 sts, 1 time 2 sts and 1 time 1st st in each 2- m row. Next, knit the sleeves. Cast on 29 sts on the needles and work first 6 cm with a 2 x 1 elastic band, continue with the lattice pattern. For side bevels, increase 1 st from each edge in the 16th and 28th rows. After 32 rows from the elastic, go to the strip pattern, alternating 2 rows of the wrong side and 2 rows of the front surface. Make the next increase in the 4th strip of the pattern, then in the 8th and in the 16th. After the 4th strip, start knitting the “embossed braid” pattern.
At a height of 52 cm from the bottom edge, make reductions for armholes. To do this, close on each side first 3, then 1 time for 2, and 1 time for the 1st loop in each 2nd row, then 1 time for the 1st st in the 4th row. Then 2 times 2 p., And 1 time 3 p. In each 2nd row. On the remaining 16 loops, knit a shoulder strap with a length equal to the length of the shoulder bevel, distributing the pattern as follows: 3 purl sts, then 10 sts of embossed braid, 3 purl.
In the last row of the lattice for a relief braid, dial not 10, but 5 loops, knit a row of facial ones, close the loops. Next, from the horizontal stripes of the lattice (photo 4), “braid” the braid, do this by analogy with raising the lowered loop along the front side of the canvas. Twist the 1st strip, making a loop out of it and pull the next strip through it (photo 5), then, similarly, all the rest (photo 6). Fasten the last loop with stitches using a needle. In the same way, sew up the hole that formed at the beginning of the "embossed braid".
Connect the parts at the side and shoulder seams. Make the neck like this: lay a chain stitch along the contour of the neck, pick up loops from the upper pigtail, knit 2 rows of purl, 2 rows of facial, 2 rows of purl, close the loops.
