Advertising on the portal

How to make a gnome costume for the New Year. New Year's gnome costume for my son for the "New Year's madness" competition. What can a suit be made from?

This year in my son's group all boys are New Year's party will be gnomes. After basic calculations, it turned out that buying fabric would be cheaper than spending money on a ready-made set. (For comparison, a finished suit costs 600 rubles, the materials cost me 300 rubles.) And now the dust has been wiped off the machine, the tailor’s chalk and scissors are in place - I get to work.

I’ll make a reservation right away: I’m a lazy person (I found something to surprise you with, right?). So here it is. I know that there are special formulas for constructing patterns. But I’ve forgotten them all and don’t want to remember them. To sew a carnival costume, in my opinion, the depth of the darts on the pants is not important, is it? We're not going to prom.

Therefore, for patterns we take suitable clothes - I have shorts and a T-shirt for my son. And let's get to work.

Panties

For the panties, fold our shorts in half and apply them to the paper. By stretching the elastic at the waist, we trace the outline of the shorts. We decide on the length of the pants. Mine is just below the knee.

We process the sections left open along the edge, laying an ordinary stitch close to the edge.

Fold the ribbons in half and iron them. We put the bottom sections of the panties into them, slightly gathering them. We sew a line along the entire length of the tape. We tie a bow on each pant leg.

We process the cut of the panties at the waistband, turning the seam allowance to the wrong side. Do not close the stitch all the way, leaving a hole for the elastic. Insert the elastic band and the panties are ready.

Cap

We measure the circumference of the child's head. From red satin we cut out two isosceles triangles, the bases of which are equal to half the circumference of the head, and the height can be any (mine is 50 cm). Don't forget about allowances!

We cut out a rectangle from white fur, one side of which is equal to the circumference of the child’s head, and the other is about 15 cm. We also cut out a small circle with a diameter of 15 cm from the fur.

We grind down the side seams of the cap.

Fold the fur rectangle in half lengthwise, right side out, and stitch it together with the bottom edge of the cap.

We manually lay a basting stitch along the edge of the fur circle.

Place some padding polyester in the middle of the circle and tighten the thread.

Sew the pompom by hand to the end of the cap.

Vest

Fold the T-shirt in half and trace the resulting sleeveless part on paper. This is the back of the future vest.

We deepen the neck, add a centimeter in width from the middle - this is a shelf.

From green fleece we cut out two parts for the shelves and one part for the back with a fold.

We sew the shoulder and side seams. We process the armholes of the sleeves, the edges of the shelves and the bottom of the vest.

We border the neck with a strip of white fur.

Sew on hooks and loops (or, like me, make thread stitches instead of loops).

For the belt, cut out a rectangle from thick fabric. One side of it is equal to the child’s waist circumference of 10 cm, and its width is twice the width of the buckle.

Fold the strip in half lengthwise, right side up, iron and stitch along the edge. At the end, stepping back a couple of centimeters from the edge, we make a slot for the buckle tongue, thread the tongue, bend the rest of the fabric to the wrong side and stitch it.

We make holes on the other edge of the belt and reinforce them with eyelets.

Sew the belt in the middle of the back.

Shoes

We trace the child’s foot on paper. We lengthen the toe, sharpening it. We cut out two foot parts, side parts and top parts from fabric.

A gnome costume is a good solution for a child preparing for a matinee in kindergarten and at school.

Stores and websites offer various options both individual attributes and the complete image. But here problems arise: expensive, unoriginal, does not fit in size.

The best solution is to create your own costume. Any mother can afford this, if you figure it out a little.

We will tell you how to sew a gnome costume for a boy

Usually boys dress up as gnomes, girls prefer the roles of other magical creatures.

Costume details

This costume includes the following details:

  • shorts;
  • knee socks;
  • accessories.

These are the things that every child has in their wardrobe.

But for the gnome to look convincing and fabulous, elements must be made of bright materials. These will have to be sewn.

For this will fit as regular patterns from the Internet or magazines, and special, designed specifically for a gnome costume.

Advice. The easiest way is to use a child's things as a template. In this case, the size and parameters will already be taken into account, so there will be no need to make additional calculations.

It is advisable to select colors so that they are combined with each other, but at the same time they are different and bright.

Traditional colors of a gnome costume: red, green, brown.

How to sew a shirt

  • Need to take any child’s shirt and apply it to the fabric, intended for a suit.
  • After that outline with chalk or a piece of soap, adding a few centimeters on each side to the seams.
  • Cut elements. The lower part should be slightly longer.
  • Then both parts are sewn from the wrong side.
  • Since this is just a suit, and not an everyday thing, you shouldn’t waste energy on complex patterns that take into account the collar, cuffs, sleeve shape, and more.
  • The neck should be wide so that the shirt fits comfortably.
  • Buttons can be both functional and decorative. But the main thing is that they are large and bright.

How to sew a vest

The vest pattern is made according to the same principle as the shirt, but the fabric should be thicker.

Important! Try to get the size right so that it fits well over the shirt, but doesn't hang down like a bag.

Vest Can be made solid or with buttons. But it’s better to use buttons at least as a decorative element.

You can add lacing on the sides. It will add color to the image and allow you to adjust the width to fit the child’s body.

How to sew pants

Shorts combined with knee socks are best for the look of a gnome.. Knee socks will suit any one in the child’s wardrobe.

The shorts are sewn from two identical parts on the same principle as a shirt with a vest. Existing shorts are applied to the fabric and outlined. The two pieces are then cut out and sewn together. Finally, you need to sew an elastic band into the waistband.

Making a cap

You need to measure the child's head, then draw two identical triangles on the fabric. They will become parts of the cap.

Their base should be half the size of the head circumference. But to this size you should add a couple of centimeters for the seam.

The parts are sewn together an elastic band is added inside so that the cap does not fly off the head.

To complete the look, you can sew a bell on top.

Advice. The cap can be made using colored cardboard. Then it will be fixed in one position

Dwarf Shoes

The easiest option is to take your child’s old shoes, cover them with fabric and colored paper, and add decorative elements.

But you can also create special shoes. You will need a durable fabric, such as felt.

on her a pattern is made of the sole and two sides in accordance with the size of the child’s feet. These parts are then sewn together and small bells are attached to the toe.

Then you can add various decorative elements.

Decorative elements and attributes for the costume

In addition to bright buttons and bells, additional details will help create the look.

This is, for example, beard, which will be a bunch of thick threads attached to an elastic band. You can weave ribbons, decorative butterflies, and flowers into the threads.

Bag gnome is optional. But just in case, it can also be made and used for its intended purpose. It should look like a bag tied with lace or ribbon, which can be decorated with applique.

Can be added to a suit belt which will complement the image. It can be simple, monochromatic. Or it may contain some stripes that imitate butterflies or pockets.

Thus, you will get an original festive gnome costume, taking into account individual characteristics child and his wishes.

You will only have to spend money on fabric and decorations. But in general, it will be cheaper than buying a ready-made version, and at the same time more interesting.

Of course, you will have to devote time to work. But this will be a creative process together with the child, in which the whole family participates.

Complete information on the topic “how to make a gnome beard with your own hands for a boy” - all the most relevant and useful information on this issue.

A homemade gnome costume for a child is the key to your child’s comfort at the New Year’s party in kindergarten or at the Christmas tree at school. Not a single costume rented or bought in a store will bring as much joy and delight to a child as the one made for him by his mother. A cheerful New Year's gnome costume with a homemade cap will be remembered by the child for a long time, and will help in this photo, which you are probably planning to take.

How to make a New Year's gnome costume for a child with your own hands

Watch the master class, which will tell you in detail and step by step how you can make a gnome costume at home.

In this costume, the most important thing is a beautiful beard and the presence of some accessories. Let's start with making a beard.

How to make a gnome beard with your own hands

To make a gnome's beard we will need:

We fold the threads as shown in the photo.

Simply sew the threads to the collar or bib.

Step by step we make the beard bigger and fuller. Sew on the elastic.

This is what a beard for a gnome will look like. We used threads Brown, but you can experiment and make a beard of a different color.

You can also see how to make a Santa Claus beard using a different technique and make it for your gnome.

Making a gnome costume

To make a gnome costume you will need:

  • shorts;
  • turtleneck;
  • vest;
  • tie;
  • cone hat (you can use a regular hat and insert a folded A4 cardboard sheet into it).
  • belly (the belly can be made from simple fabric, folded in four);
  • belt;
  • To complete the look of a gnome, you can put striped leg warmers on your child.

How to make a beard for a gnome: a simple master class with photo and video material

A birthday or New Year, a carnival, a matinee in kindergarten or a holiday at school - there are so many reasons to think about a fancy dress costume for your child. There are, of course, a lot of options. If you have chosen a gnome costume, you will most likely ask yourself the question: how to make a beard for a gnome? After all, it is she who makes the image complete and turns the little man into a real gnome, but buying it can be quite difficult and expensive. At the same time, you need to make this part of the costume comfortable so that the child enjoys wearing it during the event.

We will present for you several options for making a beard with your own hands from various materials.

Crochet beard

This method is easy to implement and does not require large expenses. If you have some leftover white yarn lying around at home, you can do without investing any money at all. A gnome's beard, as a rule, white, but this is optional. For example, characters of, say, Irish origin - Leprechauns - have a red beard.

You will need

So, in order to crochet a beard you will need:

  • Leftover yarn in the desired color
  • Elastic band (approx. 25 cm)
  • A small piece of soft fabric for lining

How to do

Cast on 40 chain stitches. On the chain, knit one row without crochet and turn the work. Next, knit in knit and purl rows.

In each front row, knit with elongated loops, and in each purl row - with connecting stitches, hooking only one half-loop of the stitches of the previous row (purl rows are necessary to return to the beginning of the front row).

How to knit elongated loops:

Take the knitting in your right hand, and with the finger of your left hand, pull out the thread.

After this, transfer the knitting to your left hand and make sure that the thread rests on the index finger of your left hand. The hook must be inserted into the loop that lies to the left of the elongated loop. Then insert the hook under the thread index finger and knit a single crochet. Release your thumb.

To secure the elongated loops, knit the next row with single crochets.

Another method, simpler, requires a regular school ruler:

When 2 or 3 rows of elongated loops have been knitted, start leaving 3-4 loops in each row so that the beard begins to take on a rounded shape.

Now all that remains is to sew elastic bands to the edges, and a fabric lining on the underside of the beard so as not to rub the chin.

By the way, this pattern of knitting elongated loops is suitable for creating a wig for other costumes, for example, a clown.

Fur beard

Making a beard from fur is very simple.

To make this you will need:

  • Beard pattern
  • Lace
  • A piece of fabric for the inside of the beard
  • A piece of faux fur
  • Needle and thread

How to do

Print out or draw a beard pattern onto a piece of paper:

Using this pattern, cut out the lining and fur.

Place two beard-shaped pieces of fabric on top of one another and sew them together.

Now all that remains is to sew on the lace or elastic band.

The beard for the gnome is ready. Of course, you choose the color yourself.

Beard made of threads

Another interesting and simple way to create a beard for a gnome costume is to make it from ordinary knitting threads.

You will need

  • Yarn for knitting
  • Needle and thread
  • Scissors
  • A collar, fabric or even a baby's bib - something that resembles the shape of a beard

How to do

Now sew them to the fabric or collar.

The second, easier way is to take an elastic band, cut the threads into strips of the same length and tie them to a string or elastic band.

Paper beard

The method of making a beard from paper is suitable if you have absolutely no time.

Fold a regular sheet of white A4 paper in half vertically and cut it out according to a template that you can either draw or print:

Non-standard options

If a costume is required for an adult who also has his own thick beard, you can create romantic image cute gnome and please others with such an interesting solution: a beard with flowers. Buy small artificial plants and simply insert them into your beard. You can also buy or borrow from your daughter small children's crab hairpins in the shape of daisies and roses and attach them.

The same can be done with glitter. At the New Year's corporate party you will be the most glamorous gnome. In this case, even a cap is not necessary: ​​your image will be irresistible.

Video on the topic

We also invite you to watch a small video selection in which you can choose other interesting ideas to create a beard with your own hands.

DIY fabric gnome pattern

New Year's parties in kindergartens are usually held in the form of a carnival, that is, children wear any costumes of fairy-tale characters. Parents are faced with the difficult task of choosing an original costume for their child, so that it does not happen that several more people come in the same costumes. Only solving the problem yourself will help. The costume needs to be sewn at home. But what to do if parents do not have such professional skills. The answer is simple. You should try to sew a gnome costume using a pattern. All elements of the outfit are quite easy to make. The article presents detailed description sewing such carnival outfits for boys.

The simplest option

If a mother has never done sewing, but wants to inexpensively make an original costume for her baby, then this is not a problem. You can always choose gnome clothes: dark trousers or shorts, a plaid shirt or T-shirt of any color, put on a belt and sew a cap. To make it beautiful and bright, you will need to buy one sheet of felt at a sewing supply store. The choice of color is yours. Dwarf hats can be of different colors.

Having measured the head circumference, transfer the dimensions to a sheet of paper and add 1 cm to the seam. You can divide the head circumference in half and sew a cap from two pieces of felt. We take any height of the triangle for the gnome pattern, as desired. Felt is a soft material, easy to cut and sew. The cut edge does not need to be processed in any way; the threads will not crumble along the edge. If you put a cap on your child New Year's celebration, then you can trim the bottom edge with fur, cotton wool or silver rain. It is also permissible to sew a pompom or cotton ball onto the sharp edge of the cap.

Dwarf beard

A mandatory element of any gnome pattern is a beard. It can be made from cotton wool with an elastic band, woven from threads of white yarn, or sewn according to the pattern in the photograph from the same felt.

To properly cut such a beard, you need to take the necessary measurements. Take a soft meter and measure the distance from the beginning of one ear through the chin to the beginning of the second ear. You can subtract 1 cm on each side so that the product does not cover your ears. Before sewing, you can always apply the cut to the child’s head, try it on and make it comfortable for him. It is permissible to make a beard in one layer, or in two layers. A simple elastic band is sewn along the edges.

Beard made of threads

You can make your own beard from thick white yarn for a gnome costume sewn according to a pattern. The thread must be strong so that the product does not break at the most crucial moment. Also, the thread should not prick so that the child does not feel uncomfortable at the party. This beard is easy to make. You can place the “hairs” on a string or rubber band.

The threads are cut to the same length so that when folded in half, it matches the length of the character’s future beard. Then a thread of yarn bent in half is threaded through a loop in the middle onto a rope, tightening it tightly so that the knots do not unravel during the holiday. The beard can be made of any size, depending on where it will be located. If it is tied around the neck, it can be made long and fluffy. If it is to be attached to a child’s head, it should match the size of the face or be from ear to ear.

Fabric suit

You can make such a simple gnome costume using a pattern yourself. To sew such a vest, you need to measure the distance from shoulder to shoulder. The fabric on the wrong side is folded in half and a simple rectangle is marked with chalk. The length of the vest is optional. The center of the rectangle is marked on top and the neck is drawn with chalk, which is then cut out with scissors. All that remains is to sew the sides to the level of the middle of the body. The vest is put on over the head. You can simply tie it with a belt, or you can make an applique on the fabric, as in the photo below.

It is best to sew such a suit from felt. The material does not crumble, so there is no need to trim the edges.

Paper cap

This version of the New Year's hat can be easily made on a sheet of Whatman paper using a pattern. The gnome will turn out beautiful too. The edges can be glued or stapled. If the cardboard is thick, you can even sew the edges. The lower part of the cap will look great with cotton wool glued on it. You can cover the entire product with fabric or make an applique, for example, gold stars.

To complete the suit, you can wear a vest and dark trousers with a belt. And on your feet, put on gnome slippers with rolled toes. Let's look at how you can do this using a pattern for a gnome.

Magic slippers

Before you start drawing the pattern, you need to trace the child’s foot in a circle on the cardboard. You can use the insole from your baby's shoes if it is dense and not deformed. Draw a foot on paper. The front is made pointed. The sides can be made whole by folding the material in half. The fold line runs at the heel.

All details of the slipper are sewn along the upper side with a decorative seam across the edge. You can take floss threads to match the material or, conversely, in a contrasting color. It is advisable to sew a felt insole to the inside of the foot so that the child’s feet do not feel cold. There is another option. Sew some slippers bigger size and put it on top of your feet, shod in Czech shoes. When the foot and side of the slippers are sewn, you need to sew on the top, the sharp edge of which faces towards the toe of the slippers.

DIY gnome costume: patterns

If your mother knows how to sew well, then you can sew your own gnome costume using this pattern. This outfit consists of several elements: shorts or pants, a vest, a cap and mittens for the hands.

After cutting the gnome pattern with your own hands, the pants need to be divided into separate parts, then all the parts are basted manually with a thread and a needle and attached using a sewing machine. After the overcasting thread is removed, you need to carefully trim the edges of the seams. At the bottom of each trouser leg, two centimeters of material are left for the hem for the elastic. After sewing the legs together, material is also left at the top for sewing in the elastic. When everything is done, insert the elastic band using a pin.

After sewing together the two parts of the front and back, the vest is decorated along the edges with a strip of fur. You can also decorate the cap. Mittens are sewn as desired. Don't forget that the New Year's party lasts a long time, and the children always dance in a round dance, during which they hold each other's hands. Think in advance whether it will be convenient for your child to steam in mittens throughout the holiday or not.

Baby outfit

It’s not difficult to make a gnome costume using a pattern for a boy. You can wear such a simple outfit for a holiday even for a baby up to 1-1.5 years old. No part of the costume should interfere with the child’s movement, press or rub. Therefore, the fabric used is soft and natural. The beard is sewn like a bib. To create a New Year's gnome pattern, you can use it as a template for sewing a beard. Contours are drawn as desired; you can take a drawing like the one in this photograph.

A belt with a large badge is sewn from soft felt, after first measuring the baby’s waist circumference. On the feet there are soft booties.

Many people don’t want to bother with sewing holiday outfits and rent suits from a studio or, in general, on the Internet. Often these suits are not processed properly. There have been cases when a child fell ill with lice after wearing such an outfit. It’s best to spend a couple of evenings and sew your own, new and original suit, especially since according to the patterns given in the article, it’s not at all difficult to do, the main thing is to want to. Try it and you will understand how simple it is, and it will cost five times less money. But you will know for sure that the suit is clean and the child will not get sick after the holiday, and will be the most beautiful. Then the costume can be worn again or given to relatives for the next holiday.

How to make a beard for a gnome with your own hands?

I made a beard for Santa Claus from felting wool (sold in craft stores). I rolled the pieces of wool together so that it seemed like they were separate strands. I think you can just sew it to some base. Fastening to the head with an elastic band. You can also suggest sewing a beard from fabric such as fleece, from cotton wool, or simply cut it out of paper, knit it from yarn.

You can also sew it from faux wool. Make a pattern from paper and cut out a beard from artificial wool using the pattern. Sew elastic bands or strings to the temples, and the beard for the gnome is ready.

A beard for a gnome can be made from paralon or cotton wool placed on cardboard with glue. It can be made of some white fur or fabric. I think that if he is a dwarf, the beard should still be white or yellowish.

How to sew a gnome costume with your own hands

Children love to dress up as various characters from films and cartoons. One of these characters is a gnome. But what to do if you buy ready-made suit problematic? In this case, you can sew a gnome costume with your own hands! For sewing any costume they can be used as a sample so as not to waste extra time on measurements.

DIY gnome costume

The gnome costume is more suitable for boys, however, with the proper approach it can also be worn on girls looks good.

The complete suit consists of the following main parts:

  • shirt or jacket/T-shirt;
  • vest;
  • panties or shorts with socks/skirt with tights;
  • shoes;
  • cap;
  • belt and other accessories - optional.

You probably already have everyday items for your child in your wardrobe. . For sewing any costume they can be used as a sample so as not to waste extra time on measurements. The gnome pattern will be very useful if you have things that are a pity to throw away and are irrelevant to wear.

Gallery: DIY gnome costume (25 photos)

How to sew a shirt and vest

Any existing shirt is taken as a basis and applied to the fabric. Next, you need to lightly outline with chalk, adding 5–7 cm each, except for the bottom (it should be extended by 14–15 cm). To put a thing on a child without effort and hassle, the neck should be large. According to the same scheme the jacket is also made.

It is better to use the largest and brightest buttons. The pattern for a girl is made according to the same principle. But you can use any bright T-shirt for these purposes, and “fantastic” will be added by accessories.

Sewing a vest is not as easy as it might seem at first glance. If you make the size too large, the vest will sag or fall off. However, such a mistake is easily compensated for by bandages and laces. The pattern is made as for a shirt, but the fabric should be thicker. The parts are stitched together from the inside. On the overlocker, the cut edges are processed and stitched, first tucking them in 1-2 layers.

Pants for a gnome

For boys, two options are more suitable: just pants or shorts with socks. The second option is preferable, because it will look more impressive. You also need to attach it to the fabric, circle it, add about 5 cm, cut out 2 such parts, sew it and insert an elastic band.

Girls are better do not use a skirt with colored tights or knee socks. The option of using shorts with a skirt is also suitable.

Dwarven shoes

Shoes for the gnome costume are made from special thick fabric. Felt plays its role. When choosing a theme, by and large, it doesn’t matter what color the base of the shoe will be, be it a New Year’s shoe or a regular one. In both cases, red bells are added so that on New Year's Day the shoes look as good as for another holiday.

Here are two main options with photos and pattern diagrams:

Making a cap

The gnome's headdress is very easy to make: first, measure the head with a thread, fold it in half and apply it to the fabric. Next, you need to add a few centimeters to it turned out to be the base of the cap. Then two such triangles are cut out, sewn together and the cap is equipped with an elastic band. The bell at the tip of the cap can be made red so that it suits the New Year holidays.

Gnome accessories

Various decorations will give your child an unusual and fabulous look. These include:

  • beard;
  • belt;
  • a handbag on a belt or on a shoulder;
  • headbands, flowers, ribbons, etc.

Creating a costume is a creative endeavor, so don’t be afraid experiment and invent something of your own.

A beard can be made from thick white threads and equip it with an elastic band. The beard will also come in handy for the New Year's Santa Claus costume. A small handbag is often present in girls' wardrobes. It can be decorated with magical attributes, decorated with dragonflies, butterflies or flowers. The bag will become more magical if you put homemade jars of potions or gems in it. Girls can use wrist bracelets and bows.

The belt can be made in several versions, differing in the type of fastening: with buttons, simply tied, etc. There are other uses for the belt - tie it around a child in the shape of the letter “x”, having previously equipped the belt pockets for small items.

Felt gnome toy

To add atmosphere to the party, you can make a toy in the shape of a small gnome and place it in a prominent place. To make it you will need two basic materials - paper and felt, the rest can be used from improvised means.

First you need to make a cone out of paper, which will form the basis of the toy. Then trim it, this will be the main suit. The top will become a cap, so you can sew another small cone on it with or without protrusions along the edges. Then we make a beard, face, patterns as desired.

We sew handles separately. The hand is sewn from 2 parts in the form of an oval. Afterwards, you can proceed to such elements as buttons on the suit, eyes, nose, etc. For this, you can use the buttons themselves, beads or any suitable materials.

When creating shoes, you should remember that excessive freedom of the legs will only interfere with the child’s walking. This applies, first of all, to those shoes with a long toe. The caps and some attributes of the gnome do not have to be made of fabric. More practical materials are plastic, paper or cardboard, etc. They are suitable for making small items.

With proper skill, you can make your own unique “2 in 1” costume, where by turning the clothes inside out, the child will receive a different color of the item. Other accessories can also be replaced with a different color - bells, headbands, etc. This approach will allow you to use the costume on summer and winter holidays. When choosing the color of the fabric, you can especially don't bother if the choice is small. After all, gnomes are fairy-tale creatures, which means they can dress however they want.

The gnome costume can be used several times, spending a little time and saving money. You can wear a suit for New Year, birthday and other fun holidays. With enough imagination, a costume can also be made for adults to diversify family life. In this case, an additional Snow White costume will come in very handy.

Attention, TODAY only!

Children's New Year's Eve parties are not complete without costumes of fairy-tale characters. Not everyone can afford to buy a suit. Moreover, the child is growing quickly and this will most likely only be an outfit for one time.

If you have a sewing machine and at least some basic sewing skills, you can sew a New Year's costume with your own hands. It’s not even necessary to buy new fabric and other finishing materials for this. We offer the idea of ​​gnome costumes for boys from what may be gathering dust in closets without use. They are not sewn according to all the rules of “cutting and sewing,” so this is by no means a training material, but only an example of how every inexperienced seamstress can make a New Year’s costume for her child.

The first version of a gnome costume for a boy

Sweater

To make a pattern, you can use a child’s item as a basis. For example, a turtleneck. We add a few centimeters on the sides, depending on how wide we want to make the jacket. Set aside the desired length. We make a round neckline. Not very deep, but enough for a head to fit through. We draw the armholes as in the photo.

The pattern of the collar and parts that are sewn to the armholes are also shown here.

Sew the shoulder and side seams. Here, for stitching details to the armholes, faux fur was used on the front side and knitwear on the back. We fold the fur and knitwear face to face and sew along one long and two side sides. We turn it right side out and stitch along the edge, placing the piece with the knitwear facing up, watching the fur pile and straightening it if necessary. Finished parts baste with armholes and sew. The edges of the strip should meet at the side seam.

The collar also consists of fur on the front and knitwear on the back. We sew the parts together, leaving the side unstitched where the collar will be sewn to the neck. Turn it right side out, stitch along the edge, placing the piece fur side down. We sew in the collar. We cut out a strip from the same knitwear and use it to trim the bottom.

Since jersey is used to finish the bottom edge, it can be cut in a straight line. If you take non-stretch fabric, you will need to cut it on the bias.

We make pompoms from black fur: two for the jacket and one for the cap. To do this we draw circles. It is convenient to use a cream jar or a small glass and circle it with a sharpened piece of soap. It is better to cut circles with a sharp blade.

Pinch off equal pieces of cotton wool. They should not be too large, but such that the pompom is softly stuffed and the cotton wool allows the edges to be sewn together without much tension. Using small stitches, we manually pass along the edge of the circle, insert cotton wool and tighten the thread. Make a few more stitches to secure the edges together. Leave the needles and threads on the pompoms.

We sew them to the jacket. It is better to do this together with small buttons on the wrong side. And it looks neater, and the fabric won’t tear.

Instead of fur pompoms, you can sew large wooden buttons. Replace the fur on the collar and armholes with wool or felt, and at the end of the cap make a tassel from the same material cut into thin strips.

Trousers

Using some of the child’s pants, we make such a pattern.

Cut out 2 pieces and place them together with right sides facing inward. Sew the middle seams and then the crotch seam. We cut out a strip for the belt from knitwear (here black stretch velvet). Its length should be less than the circumference of the top of the trousers. We will insert an elastic band, therefore, having measured its width, multiply the resulting number by 2 and add 2 cm to the seam - we get the width of the strip. We sew the edges of this part together, fold it in half along the length and attach it to the top of the pants with a slight tension, laying a line 1 cm from the edge. Leave an unstitched gap. We insert the elastic, sew its ends, hide it inside and stitch the seam to the end. The elastic inside should fit evenly, so it is important to correctly calculate the width of the strip. As a result, wide pants gather gently at the waist. We also make cuffs at the bottom, but we cut the rectangles wider and do not insert elastic.

Cap

We measure the circumference of the head and determine the length of the cap.

Here the circumference is 50 cm and the length of the cap is 45 cm.

Fold the fabric in half with the right side facing inward. Along the fold we set aside the length of the cap and put marks (in the photo “a” and “b”). From point “a” we draw a perpendicular line about 3 cm long (point “c” in the photo). From point “b” we draw a perpendicular line and set aside half the circumference of the head, plus 2 cm for a loose fit, plus 1 cm for a seam allowance, plus 3 cm. From point “c” we draw a line equal to the length of the cap (point “d”) . We connect point “b” to point “d” with a smooth arcuate line. Cut it out. It is better to immediately check on the child’s head to see if the part is too wide or narrow. If everything is correct, place it on the fabric with right sides together, trace it and cut it out. For the inside of the cap, blue jersey is used here. It is softer, thinner and more pleasant.

The gnome's cap will hold its shape slightly. To do this, we use this kind of zig-zag cotton wool. It unwinds from the roll in a thin strip, which is very convenient.

We lay out the strips of cotton slightly overlapping. Place the outer part of the cap and baste it. We sew close to the edge along the perimeter. Cut off the cotton along the edges.

Place the inner piece face up on the side with the cotton wool and sweep it off. We sew close to the edge along the entire perimeter and immediately begin to stitch with straight lines (perpendicular to the bottom of the cap) at an equal distance from each other. We don’t interrupt the line: we finish stitching to the edge, turn it, sew the required distance along the side and again straight line down, and so on. You need to stitch along the front part. The fabric will bunch up a little, no big deal, you just need to make sure it’s evenly distributed.

Fold the cap right side inward and sew the side seam and the top 0.5 mm from the edge. Turn it inside out and straighten the tip. Take the pompom and sew it to the top so that it holds tightly.

From knitwear we cut out a strip 3 cm longer than the circumference of the bottom of the cap. We measure the width of the elastic, multiply by two and add 2 cm to the seam - this is the width of the strip.

We sew the edges of this facing together from the wrong side. Fold it in half and attach it to the cap, placing the strip on the front side. When sewing, you need to stretch the cap a little, because the strip is longer. Thanks to this, the cap will fit your head, holding it tightly, and loosely on your forehead, without pressing your ears.

The figure shows the simplest option.

We cut out one piece from wool (we determine the length by the girth of the abdomen, adding a few centimeters to the free end), make a hole according to the mark, insert the buckle tongue, turn the end inside out and fasten it. We sew the edges of the loop, turn it inside out and put it on the strap. The tip can be made straight. It is better to take a plastic buckle, as it is lighter and the strap will not sag.

Shoes

This is the pattern for them.

  1. foot width
  2. foot length
  3. circumference of the foot at the highest point divided by 2
  4. ankle circumference divided by 2

The circumference of the foot is measured as follows: place your foot on the floor and use a measuring tape to measure (with an arc along the leg) from the floor on one side to the floor on the other.

We add a few centimeters to the resulting measurements, because the gnome’s shoes are voluminous. The tongue, toe of the shoe and tip of the sole are modeled freely. For the base of the sole, you can place a child’s shoe on a sheet of paper and trace it. An error was made here and the width of the tongue was not taken into account. That's why the shoes turned out to be huge.

When constructing the side part, divide the width of the tongue by 2 and subtract the resulting result from lines 3 and 4.

The material used was artificial leather, and the seal was a yoga mat. You can take wool or felt. And to add volume - cotton wool. Or do without a gasket altogether.

We cut out the details. If the material allows, we make the sidewalls one-piece; if not, the upper part is cut out separately.

Sew the sides together. To strengthen it, non-woven interlining is used (without ironing), and the edges are ground with a zigzag.

In the same way, we sew the halves of the lapels if the parts are not one-piece.

Sew the top parts to the main ones.

We apply the second parts of the top, sew and zigzag along the sides and top sides.

Then you can stitch along the face again with a thread of a contrasting color.

We place the assembled front part on the fabric (here stretch velvet) and trace it along the contour, excluding the top.

We make an allowance as in the photo. You need 2 of these parts.

Sew on the lining as shown in the photo.

The sealing material was glued with Moment Crystal transparent glue. It must be applied to the entire surface in a very thin layer. First, on one side and apply it to the faux leather part, then on the other side, apply the velvet part. Press down, for example, with a stack of books. However, you can skip this step. Moreover, then the skin comes off in some places, so this method is not very good. And the glue can even seep through the fabric and you get a hard stain.

For the bow we sew a strip.

For the sole and tongues, we also cut out paired parts and assemble everything together.

In the middle of the main part we sew a strip for a bow.

We sew the sole to the main part manually using an overlock stitch. We start from the spout, stepping back slightly from the edge. We also finish the seam a little short of reaching the end.

Sew on the tongue. Mark the middle point on it, align it with the nose and start sewing.

Pull the strip for the bow a little and mark the line where to sew. Remove from the shoe and stitch along the mark.

We form a bow, determining the length of its ends.

We scribble diagonally.

Now you need to sew the middle together - seam to seam.

The bow turned out too big and falling down.

Tip: To accurately determine the length of the strip you need to sew, use a measuring tape. Tie it on your shoe with a bow and see how many centimeters it takes.

Let's make it like this: put the parts together as in the photo and sew them together.

Of course, the bow was too tricky. It could be easier. For example, make it separately by sewing a rectangle, lightly stuffing it with cotton wool and gathering it in the middle. Then sew to the shoe. If you use felt or wool for the shoe, you can pull it up along the leg using an elastic band, and for a bow, a wide ribbon or a buckle is quite suitable.

We pull the bow tightly in the middle with a piece of elastic and sew the ends together.

Sew the bow to the top of the tongue, stepping back a little from the edge.

We make 2 pom-poms and sew one on each spout so that they “sit” firmly in place.

This is how the gnome's shoes turn out.

And the general image.

The second version of the gnome costume for a boy

Since the costumes are for brothers, it was decided that they would not differ much. The main fabric is the same (it's an old curtain, by the way). Only a different color is used for finishing. And other shoes.

Blouse

We take something as a basis. Here is a jumpsuit, and since it is tight-fitting and already small, we add quite a lot (the fold is on top of the fabric). Sew along the sides.

From the knitwear we cut out a strip around the circumference of the sweater, sew the ends together and iron the edges towards the middle.

Baste to the edge of the sweater, then stitch close to the edge. It is important here that the seam runs smoothly from the face and back and does not go beyond the edge. You can put a decorative stitch on top.

The neck can be made deep enough for your head to fit through freely. Otherwise, you need to make a fastener. To do this, make a perpendicular cut in the middle of the back part (or front part).

The facing would be more careful here, but if there is not enough fabric, we will also trim the neckline with a strip of knitwear. We adjust it from the inside out to the end of the cut.

Sew the edges and finish the stitching.

Now we make a buttonhole. We fold the thread in several layers, thread it through a needle, tie a knot, pierce the facing on the coal from the inside out, bringing it out.

We crochet a chain of air loops of the required length.

Now we insert the needle inside. Make a couple of stitches near the base of the loop, fasten and cut the thread. We turn the edging, baste it, stitch it.

It is also finished with decorative stitching.

Iron, pressing the curve at the bottom of the cut. Sew on the button. The clasp is in the shape of a drop.

We cut out 2 parts from the same jersey (their length is calculated according to the circumference of the place on the sleeve where we will sew) for the drawstring on the sleeves. Iron the edges towards the middle.

We tuck the ends and it is more convenient to stitch them manually.

For tying we take thin ribbon, cut off the required length and string a bead onto one end, securing it with a knot at the bottom.

Sew on the drawstring, moving away from the edge of the sleeve. We thread the ribbon. We string the second bead. We tie a bow.

Panties

We cut out along the bottom of the child’s overalls. Add as much as necessary.

Sew the middle (back and front) seams, then the step seam.

Iron the edges.

Since the pants are wide and need to be seated on the stomach, we make a fold or tucks on the sides. You can make them with an elastic band. But then, when cutting, do not forget to add on the hem.

Here a fairly wide strip of knitwear is used, which is shorter in length. The elastic was not inserted inside. The strip is cut out to such a length that it fits tightly around the stomach, but does not press.

Hem the edges of the trousers. At some distance from the bottom, we sew a drawstring and insert a ribbon with beads at the ends. We tie bows.

Vest

We cut it like this.

All parts are sewn with an overlay seam, so we make allowances of 0.5 cm, and on the sides and shoulders - 1 cm. There is no need to make allowances along the armhole, neckline, bottom and on the opposite edges of the front. But if you sew from wool or felt. Bulk material will need to be processed.

It is convenient to mark the seam line and apply the part along it. We sew on the front side.

First we assemble the back and front, then we sew along the sides and shoulders.

You can beautifully stitch it with a contrasting thread, for example, in the color of the main fabric of the suit.

We mark the places for the buttons.

We fold the thread in several layers, thread it into a needle, fold it in half, and tie a knot. We pierce the fabric and hide the knot with a few stitches.

We crochet a chain of air loops.

Carefully sew around the base of the loop, hide the thread, and cut it.

We tighten the buttons into knitwear. Cut out circles with a diameter larger than the buttons. If the fabric is thin, you can make a double layer so that the button itself does not show through.

Place the button on the wrong side of the circle, pull it together and sew the ends together randomly. To comfortably tighten the circle, sew around its perimeter. We do not cut the threads with the needle.

Sew on one button.

Then the second one, closing the base of the loop.

We cut out 2 stripes for the belt and a loop along the width of the buckle. The length is determined by the girth of the abdomen, adding the desired length of the free edge.

Place the strips together face to face. In the middle at the end we mark the place for the tongue, stepping back from the edge. We lay lines above and below this gap.

We thread the strip into the buckle, insert the tongue into the hole, fold the parts of the belt and, without tucking the edges, sew around the perimeter. We sew the ends of the loops together, turn them right side out and put them on the strap. Mark the location for the holes.

We cut out small holes (it’s convenient to do this with a seam ripper) and sew them by hand along the edge.

Cap

We cut it out and line it with cotton wool.

The same fabric is used for the interior.

We sew and turn it inside out.

We cut 2 strips along the width of the cap. The wool used here is the same as for the vest.

Place them together face to face and sew along one edge. Trim the allowance at the ends.

Iron the seam. We apply the resulting unfolded part to the knitwear. Cut out the inner part from knitwear as in the photo.

Sew the ends of the knitted part and the remaining ends of the front part. Let's put it together. Place the knitted strip face up and place the wool strip face up on its edge. We stitch close to the edge.

This is what the inside looks like.

Now we turn it inside out. We have a knitted part on top of the woolen part. So we put it under the foot of the sewing machine. Fold the edge of the knitwear evenly over the edge of the wool and sew a stitch. We make sure that the knitwear under the foot does not move forward too much.

Assembling the strip with the cap. We place it on the edge of the cap with the wool part outward with sufficient allowance. We fix it at 4 points at equal distances. We sew along the perimeter.

Shoes

Let's make a pattern.

It’s better to check the result on paper: sew a shoe from it and, if necessary, correct discrepancies in the length of the sidewalls and the sole.

We cut out the details. Here the shoes themselves are entirely made of wool, and padding is made from padding polyester.

We collect these “sandwiches” and stitch them close to the edge. If necessary, smooth the edges.

We sew the sides of the shoes together edge to edge.

Hand sew the top together using a blanket stitch.

Cut out rectangles for the top. We sew the ends of each. We trim the top edges with a stitch.

Place it on the top edge of the shoe and sew it on by hand. First with small straight stitches, then with overcast stitches.

We sew the sole with a blanket stitch, starting from the nose.

We make 2 pom-poms from fur and sew them on the noses.

Ready! They turned out soft and cute.

And the general view.

Perhaps you will say that it does not quite look like gnomes. Yes, white fur is more associated with Father Frost or Snow Maiden. But we gave all the recommendations. No beard? And who said that these cannot be the children of gnomes who have not yet grown it?

What children's party goes without carnival costumes and fairy-tale characters? And especially memorable are those moments when the baby himself becomes a participant in the holiday. The transformation of children into heroes of popular fairy tales begins in kindergarten, even then teachers assign small roles to their charges and puzzle parents with the purchase of costumes and accessories for the upcoming event.

Boys are often dressed in the costume of a gnome, a bunny, a bear or a brave musketeer. Preparing for the upcoming event is a very responsible task both for the leading actor and for his mother and father. Parents, of course, will want to capture their son in a photo or video. Afterwards it will be carefully stored for many years, reminiscent of the bright magical holiday of childhood. If your child has the role of a gnome, you need to carefully prepare for it.

Fairytale costume

It would seem that finding a gnome costume for a boy is one of the simplest tasks; you just have to go to the store and buy it, or perhaps rent it at a salon. But in reality, everything is not so simple.

The choice of suits is really great - for every taste and color, but the price for such clothes will be, to put it mildly, “fabulous”. Buying an expensive gnome costume for a child is not the best solution, because he will only wear it once, and next year the costume will be too small for him, children grow up quickly.

You can, of course, try to choose a cheaper outfit, but often the appearance of such suits is depressing. The material used for them is of the lowest quality, they are sewn haphazardly, and thanks to the flashy poisonous colors and appearance often vaguely resemble a character from a fairy tale.

Of course, everyone wants their child to stand out from others. But where is the guarantee that the parents of classmates will not buy their son exactly such an outfit? This is probably why most mothers have the idea of ​​why not try to sew a gnome costume with their own hands. Is it difficult? Let's answer this question together.

How does a gnome dress?

A gnome is a gray-haired old man with a long beard who lives in the forest or mountain caves. Dwarfs work mainly as miners - they extract underground treasures and carefully protect them from prying eyes. They are constantly at work, so their decoration is not particularly rich. The little old man dresses simply and comfortably: a shirt with a vest, short pants or shorts with suspenders, ankle socks, and a wide belt with a beautiful buckle on his belt.

The main attributes of a real gnome are a cap on his head and a thick gray beard. The gnome's shoes are also simple - ordinary leather boots or shoes with toes turned up. As you can see, there are no complex elements in the wardrobe of a fairy-tale hero, so sewing a gnome costume with your own hands will not be difficult.

What can a suit be made from?

Before you go fabric shopping, take a look at your wardrobe. Surely you have things that you don’t wear, but their quality is quite acceptable. Your son will probably have some clothes that he has outgrown, all you have to do is alter them a little, add some additions - and you will have an excellent gnome costume.

The color scheme can be completely different, but usually gnomes prefer green, brown or yellow flowers. The gnome's cap is long, with a pompom at the end. In his hands, an old man can carry a traveling bundle with provisions tied to a long stick.

In our article you will find several different ideas on how to dress up a boy. Perhaps our photos will give you some interesting ideas. Any mother, even one who has never encountered sewing before, can easily make a gnome costume for her son.

Shirt and socks

The shirt should be plain or just white. You will have to buy golf socks; they are either white or with stripes. But if you decide to dress the boy in long pants, then you may not need them; ordinary socks will do just fine.

Vest and belt

The vest can be easily sewn from any thick fabric. You don't need any special pattern. Take your boy's T-shirt, fold it in half lengthwise, attach it to a piece of paper and draw an outline with a pencil. You don't need sleeves. A gnome costume can be with a short vest or, on the contrary, with a long vest. This one will be belted on top with a belt. The floors can be slightly rounded in front, your pattern is ready. Now all that remains is to sew the parts together. If desired, you can decorate the edges of the vest with pieces of faux fur or a strand of cotton wool.

You can use an old leather belt from your wardrobe, cut it to size and make a beautiful buckle for it. It can be cut out of a thick piece of cardboard, wrapped with foil or any fabric on top, and decorated with beautiful stones or beads. Perhaps there is a large beautiful brooch in your house?

Pants or shorts

Your child's pants, which are already too small, will be perfect. You can tuck them a little more at the bottom and decorate the sides with bows. Many gnomes have suspenders in their wardrobe, if you have them at home, feel free to use them for a suit.

Cap and beard

A gnome costume for a boy must have an important element - a cap. You can easily sew it yourself. Measure the circumference of the child's head and the desired length of the cap. Transfer to fabric, cut and sew. You can sew in an elastic band - this will help keep the cap on your head better. Don't forget to make a pompom - it is an important element of the hat. If desired, you can decorate the cap faux fur or cotton wool.

The beard can be made from cotton wool or knitted from white threads with beautiful air loops. Secure it with an elastic band or sew it to the cap.

Shoes

Use regular shoes that your child wears. They just need to be decorated with a beautiful buckle, the same shape as on the belt. The trick is simple - cut it out of cardboard, cover it with foil and decorate it.

If you put in just a little time, effort and ingenuity, your boy will turn out to be an excellent fairy-tale gnome. The New Year's costume can be embroidered with Christmas tree rain, snowflakes and a little sparkle. The frost may lightly touch the nose and cheeks fairy tale hero and leave a light blush on them (with the help of mom’s blush, of course).

As you can see, making a suit for a boy with your own hands is not at all difficult and does not require any special expenses. There is another big plus in this - your outfit will be one and only, original and unique of its kind. This one will certainly be remembered by you and your child. Happy and fabulous holidays to you!